The Linksys Dual-Band Wireless A+G PCI Adapter installs in most desktops and lets you put your computer almost anywhere in the building, without the cost and hassle of running network cables.
Now you don't have to drill holes in your walls and climb through the attic or cellar to get connected to the network.
Once you're connected, you can keep in touch with your e-mail, access the Internet, use instant messaging to chat with friends, and share files and other resources such as printers and network storage with other computers on the network.
The Dual-Band Wireless A+G PCI Adapter connects you with Wireless-A (802.11a) and Wireless-G (draft 802.11g) networks at an incredible 54Mbps!
And for added versatility, it can also interoperate with all the 11Mbps Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country.
And whichever mode you choose, your wireless communications are protected by up to 152-bit encryption, so your data stays secure.
So don't hassle with running cables through your house -- get your desktop connected the easy way with the versatile Linksys Dual-Band Wireless A+G PCI Adapter.
Benefits- Universal wireless adapter connects your desktop PC to Wireless-a (802.11a), Wireless-b (802.11b), or Wireless-g (draft 802.11g) networks
- Incredible data rates up to 54Mbps
- Protects your wireless communications with up to 152-bit encryption
- Put your PC wherever you want, with no cabling hassle
Features- One adapter connects to either 2.4Ghz (802.11b or draft 802.11g) or 5Ghz (802.11a) networks
- Advanced security features with up to 152-Bit WEP encryption
- Easy to use Setup Wizard
- Detailed monitoring and performance utility
- IEEE 802.11a, 802.11b and draft 802.11g compliant
The Linksys Dual-Band Wireless A+G PCI Adapter installs in most desktops and lets you put your computer almost any-where in the building, without the cour walls and climb through the attic or cellar to get connected to the network. Once you're connected, you can keep in touch with your e-mail; access the Internces such as printers and network storage with other computers on the network.
The Dual-Band Wireless A+G PCI Adapter connects you with Wireless-A (802.11a) and Wireless-G (802.11g) networks at an incredible 54 Mbps and for added versatility, it can also interoperate with all the 11 Mbps Wireless-B (802.11b) products found in homes, businesses, and public wireless "hotspots" around the country. And whichever mode you choose, your wireless communications are protected by up to 152-bit encryption, so your data stays secure.
The Dual-Band Wireless A+G PCI Adapter connects you with Wireless-A (802.11a) and Wireless-G (802.11g) networks at an incredible 54 Mbps, and for added versatility, it can also interoperate with all the 11 Mbps Wireless-B (802.11b) products found in homes, businesses, and public wireless "hotspots" around the country. And whichever mode you choose, your wireless communications are protected by up to 152-bit encryption, so your data stays secure.
| 
See a comparison diagram of the different wireless technologies. | Wireless networks are rapidly becoming more popular and coming down in price. Since they don't require cables, you can use the devices anywhere in an office or home, even out on the patio. There's no need to roll out an Ethernet network cable to each room of a house; you can network anywhere -- without wires. Outside of the home, wireless networking is available in hotspots at coffee shops, businesses, airports -- great when you're on the road and need to get some work done. For convenience, wireless networking is the answer.
What Wireless Standard is Right for Me?
Now that you've decided to create a wireless network, the next step is to figure out which wireless standard to use. Basically, a standard is a set of specifications for a device. All devices that follow a specific standard share operating characteristics, such as the radio frequency used and maximum data transfer speed.
For wireless networking, there are three standards to choose from at this time: To learn about the differences between the standards and select the right one for your network, click here for an easy-to-understand chart. |
1 Wireless on the Desktop
I just recently move from dial-up to DSL. Going DSL was not enough; I did not want to have cables running though the house so I started looking into going wireless. To make a long story short, after a little investigation I decided to make the leap into wireless technology. I purchased the WAP55AG router and the adapter cards, WMP55AG and WPC55AG.
Once the WAP55AG router was installed and set up, the installation of the WMP55AG PCI Adapter on each of the desktops were simple.
I had no difficulty setting up the hardware and software and with a few hours, I was on the net through the router. One desktop is running XP professional and the other desktops are running XP Home edition.
The LinkSys Web site has all the documentation you need for installation and setup. There is a "Knowledge Base" page that covers a lot of the products and answers to a lot of questions about various products and configurations; I found it to be very helpful.
Pulled from LinkSys Web Site:
----------------------------------------
The Linksys Dual-Band Wireless A+G PCI Adapter installs in most desktops and lets you put your computer almost anywhere in the building, without the cost and hassle of running network cables. Now you don't have to drill holes in your walls and climb through the attic or cellar to get connected to the network. Once you're connected, you can keep in touch with your e-mail; access the Internet, use instant messaging to chat with friends, and share files and other resources such as printers and network storage with other computers on the network.
The Dual-Band Wireless A+G PCI Adapter connects you with Wireless-A (802.11a) and Wireless-G (draft 802.11g) networks at an incredible 54Mbps! And for added versatility, it can also interoperate with all the 11Mbps Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country. And whichever mode you choose, your wireless communications are protected by up to 152-bit encryption, so your data stays secure.
Features of the product:
--------------------------------
One adapter connects to either 2.4 GHz (802.11b or draft 802.11g) or 5 GHz (802.11a) networks
Advanced security features with up to 152-Bit WEP encryption
Detailed monitoring and performance utility
IEEE 802.11a, 802.11b and draft 802.11g compliant
System Requirements (Minimum):
---------------------------------------------
200MHz of Faster Processor
64MB RAM
Available PCI Slot
CD-ROM Drive
Windows 98SE, Me, 2000 or XP
2 poor
first off, i am a fairly seasoned network administrator. I recently began using wireless at my home, with a d-link extreme-g access point and one of the machines using a d-link 802.11g card. All was fine. I decided to add 802 support to an additional pc but wanted something more flexible (as i move around) so i choose this linksys A+G card. . .
*after* the product arrives, i noticed on the box it says Draft 802.11g support, however amazon.com advertised it as regular 802.11g support.
After a blue-screen hangup (in winXP SP1), a download of some new drivers from linksys, and about 3 hours of trying every possible setting there is, the linksys product did not work.
My access point has the latest firmware, and at least one other client here at home (using a d-link card) can connect just fine. I figure this card does not work because it (now that i realize) only supports the Draft 802.11g standard, however my access point also supports 802.11b which this card is supposed to support as well?
Bottom line, this product was no good.
