Nikon MC-EU1 Remote Release Cord for Coolpix 4300, 4500, 5000, 5700 & 8700 Digital Cameras


Compras Nikon
Bluetooth
This cabled remote, permits remote shutter release of the camera. You can also enable zoom setting, interval shooting, playback and LCD zoom setting, interval shooting, playback and LCD illumination on/off. You can also confirm information such as the set mode and the number of frames to be captured.
1 Waste of time and money
Very disappointing, wish I'd seen and heeded these reviews before buying. Everything they've said, I've found to be true. The cord on the remote is so short that it really defeats the purpose of purchasing one -- you gain less than an arm's length, making this really only beneficial for use with specialty lenses or extensible tripods. I've also found the buttons to be quite difficult to use. They're miniscule and set into the remote in such a way that makes them difficult to depress. I've given up on this model.

Also, regarding the retailer. While I did receive the item, it had visibly been shelved for quite some time (more than normal wear to the box, inside components dusty). It also appeared that my "new" purchase was a return as the packaging had all been opened and resealed, some of the informational packaging was missing and the included battery dead.
2 NOT A HAPPY CAMPER
The remote is too small, and why is the diagram showing where the different parts are, only in German and Japanese? In this country, English is still the primary language, and I may read German, but I don't understand enough to translate the instructions here. Also, I can't see the print on the remote in the dark, and the buttons are a little too small, even for my small fingers. I don't understand why the camera locks up after I change the battery, and it's very frustrating to try and use something that is just going to mess up my camera, and thus my project. Also, the cord is a bit too short. Can't say I'm happy with this item.
3 Necessary Evil
I have used this devise extensively and it is definately required for tele-3X converters, macro, registration/animation shots. I'm using a Nikon 995 and without it the above photos would have been degraded without its useage. A necessary item. However, the flip side is that some evil designer, who should be demoted, only allowed for a 2 minute min. interval. Not 1 min, 30, 10, 5 sec's DUH! In addition the plug is really small, unplugs readily (even when you don't want to) and the cord is really short,with no extensions available. In addition, the USB port that accepts this devise has worn rather quickly for a Nikon, with connection becoming erractic if at all. The camera is presently in repair for replacement of the port/connector. I think that NIKON should issue some sort of incentive for those who bought this accessory. Its a love/hate relationship.
4 miserable product
All the comments here are spot on. I found a much better unit called the 'digisnap' (made by harbortronics) which works better, both as a remote release (longer cable, no filter) and a timelapse controller (much faster interval -- 5 sec vs. 2 min). Skip the Nikon unit.
5 homongous thingee
richj68 is right to horrified by this. This noise filter is too heavy and too close to the Nikon's minute USB plug in the camera. It flops around and, ultimately, breaks the solder joints in the plug and pulls the wire loose. This happened to me at a wedding shoot just as the bride was walking down the aisle. It crashed the camera and I lost some very important pictures.
6 I agree with the other reviewers
- a poorly designed product, can't read the display, can't push the buttons, can't predict what is going to happen or when the camera is going to lock up after you push them. Very disappointing. Unfortunately, it is necessary for close-up work and long exposures.
7 disappointing
LCD is hard to read without backlight. The buttons are too small and heavily recessed which makes it very difficult to press them, even though its designed to make it hard to accidently press, its a little too much. Whats with the minimum setting of 2 minutes between time lapses, thats just silly, if you are lookign to do timelapse at anything less than 2 minutes internals, this won't do it. The remote knows when the camera is busy so it could record as quickly as the camera saves. If the camera powers down, I can't get it to switch back on from the remote, only from the main camera controls. The battery insertion diagram is misleading, I installed the battery upside down first time. ( + facing down is correct ). The big R/F filter is no doubt since nikon got its hand smacked by the FCC last year for emission problems with other accessories ( the 950 AC adapter ). However its the only remote release available if the 2min minimum is fine for you and you don't mind reflashing the cameras firmware ( which you must in order to use properly if you have version 1.0 ) then you are all set, on reflection I'd still buy it since a remote release is a must for steady work.
8 Not too impressed
Well, I've been waiting for a long time for this item and I finally got it a few days ago. It's a pretty cool little thing that feels good in your hand and has neat features like a backlit LCD for low light situations. But, there are many problems with it. First of all...if the camera is busy storing a picture it just took, and you attempt to turn on the LCD backlight, 75% of the time the display will go completely blank and it will stop working. You have to turn the camera off and back on to get it working again. Second, the time lapse feature is awesome but get this: the smallest duration between each picture is 2 minutes. If you've ever done time lapse of a sunset to turn into a movie, you'd want to take a picture about once every 30 seconds. Or, taking a time lapse of a busy lake with boats crusing around, after 2 minutes, most boats would be off the screen and the time lapse "feeling" wouldn't be captured. Now, taking a time lapse of say a plant growing, no problem. It has intervals all the way up to 24 hours! Thrid, it has a humongous thingee (some type of noise filter) hanging on the string (cable) that almost pulls the cord out just hanging there. Also, the camera acts differently with this thing plugged into it and seems to forget some of the menu items I have set such as remember last zoom position and flash mode. Was this device designed by Microsoft or something???

Thursday, 04-Dec-2008 19:22:24 CST
Quote of the Day:


FORTUNE'S GUIDE TO DEALING WITH REAL-LIFE SCIENCE FICTION: #2

What to do...
if you get a phone call from Mars:
Speak slowly and be sure to enunciate your words properly. Limit
your vocabulary to simple words. Try to determine if you are
speaking to someone in a leadership capacity, or an ordinary citizen.

if he, she or it doesn't speak English?
Hang up. There's no sense in trying to learn Martian over the phone.
If your Martian really had something important to say to you, he, she
or it would have taken the trouble to learn the language before
calling.

if you get a phone call from Jupiter?
Explain to your caller, politely but firmly, that being from Jupiter,
he, she or it is not "life as we know it". Try to terminate the
conversation as soon as possible. It will not profit you, and the
charges may have been reversed.

The soul would have no rainbow had the eyes no tears.